[. . . ] Hardware Read entire installation sheet before you start assembly of this item. [. . . ] Microwave Oven Models MO699SST-1/MO7080MW/MO7090MB/M07180TW/MO7280TB Part Number MOM9704 Qty 1 Description Mounting Bracket A B 9704-001 2 Locking Pin C D E 9704-002 9704-003 9704-004 3 4 4 No. 8 x 1" Phillips Pan Head Sheet Metal Screw Plastic Anchor (¼" x 1") Installation Procedures: 1) Bracket Configuration: Holes (A), (B) and (C) are the existing holes in the upp er part of the Metal bracket. Holes (D), (E), (F) and (G) are also existing holes in the lower part of the Metal bracket. See illustration #1. A D E B F C G Illustration # 1 2) Installation of the upper side of the Metal bracket to the Microwave: Place top of the bracket on the back of the microwave. Align the four (4) holes of the lower part of the metal bracket to meet the four (4) plastic anchors installed in previous step 6. Secure with the four (4) Phillips Pan Head Sheet Metal screws (provided) using a Phillips head screwdriver. 7) Safety features : For your Safety, this metal bracket comes with two Lock Pins that will prevent the Microwave oven from tilting back while in use. These two (2) Lock Pins (provided) can be lifted and removed to allow you to clean the refrigerator top. It is recommended to have both Lock Pins installed once the refrigerator is cleaned. [. . . ] It is recommended to have both Lock Pins installed once the refrigerator is cleaned. [. . . ]